Tubing and fitting

Sort By:
Article number: THS-01068
1/16" OD 0.5 mm ID stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01023
5 pcs SS ferrules and 5 pcs nuts (1/16" SS tube connection)
Article number: THS-01063
1/16"x0.5 mm ID, 400 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01062
1/16" x 0.5 mm ID, 300 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01064
1/16"x0.5 mm ID, 600 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01061
1/16"x0.5 mm ID, 200 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-50892
For use between the HPLC Pump and the Inlet Pressure sensor with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-61048
For use between Module Connector and the heater unit with the H-Cube Pro; 1/16" OD 0.5 mm ID, spiral
Article number: THS-50899
For use between the System Valve and the Outlet Valve Switch with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-50881
Consumable for H-Cube Pro, OD 1/16", ID 1.0 mm, 500 mm with fitting
Article number: THS-50897
For use between the Module Connector and the System Pressure sensor with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-50898
For use between the System Pressure sensor- System Valve with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-50880
Consumable for H-Cube Pro, OD 1/8", ID 1.5 mm, 350 mm, with fittings
Article number: THS-50893
For use between the Inlet Pressure sensor and the Mixer with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-50896
Module Connector line with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-61028
For use between the Heater Unit and the Module Connector with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-50894
For use between the Mixer and the Bubble detector with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS-50895
For use between the Bubble detector and the Module Connector with the H-Cube Pro; 1/16" OD 0.5 mm ID
Article number: THS 61034
Inlet tubing with PTFE filter (1/4-28 flat-b. Connector (preassembled) 1/8”OD tubing, 0.5 m)
Article number: THS 61035
Tubing for outlet (1/4-28 flat-b. Connector (preassembled)., 1/16”OD tubing, 0.5 m)
Currency