Tubing and fitting

Sort By:
Article number: THS-01008
Includes: 1/8" nut (connection to pump), teflon tube, inlet filter
Article number: THS-01068
1/16" OD 0.5 mm ID stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01023
5 pcs SS ferrules and 5 pcs nuts (1/16" SS tube connection)
Article number: THS-01063
1/16"x0.5 mm ID, 400 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01062
1/16" x 0.5 mm ID, 300 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01139
1/16" SS bent SS tube used with the 70mm CatCart holder
Article number: THS-01064
1/16"x0.5 mm ID, 600 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01061
1/16"x0.5 mm ID, 200 mm length stainless steel tube, compatible with  H-Cube SS, H-Cube Mini, H-Cube Pro, H-Cube Midi, Phoenix Flow Reactor, X-Cube
Article number: THS-01119
1/16" SS bent SS tube used with the 30mm CatCart holder.
Article number: THS-20012
Fingertight tube connection for inlet/outlet valve (P-318 + P200)
Article number: THS-01016
For use between the CatCart cup and the back pressure sensor of theH-Cube; 1/16" OD 0.5 mm ID); for 70 mm CatCart holder
Article number: THS-01038
Between system pressure sensor and system valve (H-Cube); 1/16" OD 0.5 mm ID
Article number: THS-01028
Between CatCart cup and back pressure sensor (H-Cube); 1/16" OD 0.5 mm ID); for 30 mm CatCart holder (THS PC210)
Article number: THS-01037
For use between mixer and the bubble detector of the H-Cube); 1/16" OD 0.5 mm ID
Article number: THS-01036
For use between the inlet pressure sensor and the mixer of the H-Cube); 1/16" OD 0.5 mm ID
Article number: THS-50882
For use between the Check Valve and the pass through; 1/16" OD 0.5 mm ID
Article number: THS-01048
For use between the bubble detector and the heating element of the H-Cube); 1/16" OD 0.5 mm ID, spiral coil